You have just received your Magic film®,unpack itthoroughly, and lay it flat in a place
at theshelter of any damage.
​
The magic movie®is protected by 2movies transparencies, one for masking protection,
and one for self-protecting surfaceadhesive.
​
Clean the installation surface using the appropriate products and clean the protection on the side
self-adhesive to eliminate the maximum of dust.
​
Remove the protective film from the adhesive side by about 5 to 10 cm bystarting from the top of the film, to be able to adjust it as well as possible on the installation surface, then apply the magic movie®on the surface.
​
Smooth this first strip so that the magic movie®adheres to the surface, then gradually remove the protection while passing the squeegee horizontally in strips of about 10 cm.
​
Once the magic movie® entirely posed, all that remains is to connect the transformer to the film,
then connect the transformer to your mains.
​
A detailed installation guide will be provided with your order.
Magic Film® Installation
Start by measuring the exact dimensions of the location where you want to install the Magic film®.
​
Keep a margin of about 2/3mm from the edges of the frame or the void. (Attention, if there is a metal frame, please take a margin of at least 5mm on each side so as not to disturb the electric field of the film)
​
Contact us to place the order, indicating the color, the dimensions and the location of the connectors. (The connectors canbeings located at your choice, on the length or on the width and measures 8mm approx, to be taken into account when measuring)
​
2 Types of installations, self-adhesive or standard
Laying the Magic Film®in self-adhesive version
You have just received your Magic movie®,unpack itthoroughly, and laid it flat in
a place toshelter of any damage.
​
The magic movie®is protected by 2movies transparent.
​
Clean the installation surface using suitable products then clean the protection
on the side that will be in contact with the installation surface to eliminate as much dust as possible.
​
Apply our transparent double-sided tape to each side of the installation surface.
​
Completely remove the back protective film, then apply the magic movie®on tape, instarting from above to be able to adjust it as well as possible on the installation surface,
​
Once the magic movie® entirely posed, all that remains is to connect the transformer to the film, then connect the transformer to your mains.
​
_cc781905-5cde-3194 -bb3b-136bad5cf58d_ _cc781905 -5cde-3194-bb3b-136bad5cf58d_ _cc781905-5cde-3194- bb3b-136bad5cf58d_ _cc781905- 5cde-3194-bb3b-136bad5cf58d_ A detailed installation guide will be provided with your order
Laying the Magic Film®as standard
Copyright © 2016 Seedertech GR seedertech.com All Rights reserved!